CNC Press Brake Machine form China with DA-69T

PBS Press Brake Machine

Certificates For Banner

Press Brake Machine

PBS Series Main Motor Servo CNC Press Brake Machine, it’s an affordable CNC press brake, an impressive number of features and options. Competitive pricing with advanced DELEM DA-66T or DA-69T 3D capable graphical controls, High Standard Series is your first choice in Y1/Y2 machine technology.

CNC-Press-Brake with DA-69T
PBS CNC Press Brake Machine - square blank shearing

Simple and solid press brake

PBS CNC Press Brake Machine - shears manufacturers

Work area can be customized and all types of tool clamping can be installed

PBS CNC Press Brake Machine - guillotine shears models

Tailored-made sheet metal press brake

  • Controller: DELEM DA-66T
  • Electrics: Schneider Electric - France
  • Main Motor: Siemens Motor - Germany
  • Servo Motor: ESTUN
  • Foot Switch: KACON - South Korea
  • Hydraulic System: Bosch Rexroth - Germany
  • Oil Pump: Sunny - USA
  • Sealing Ring: PARKER - America
  • High Efficiency Motor - Class IE3
  • Tube Connector: EMB - Germany
  • Backgauge: Hiwin - Taiwan
  • Grating Ruler: Fagor

Standard Equipment

Introduction to Configuration

solid body

FEA & Stress Analysis

Stress Analysis & Finite Element Analysis

The CAE software SOLIDWORKS used as the method to analyze the linear static construction, stress and deformation for press break and laser cutting machine frames. So for complicated structures, highly complex loading’s, transient modelling and combination of the above, FEA makes sense.

DELEM DA-66T Control

DELEM CNC Control System

DELEM DA-66T Control

  • 2D graphical touch screen programming mode
  • 17" high resolution colour TFT
  • 3D graphics acceleration
  • Colour LCD display
  • 1280 x 1024 pixels, 16 bit colour
  • Full touch screen control (IR-touch)
  • Sensor bending & correction interface Profile-TL offline software
  • Full Windows application suite
DELEM DA-69T Control

DELEM CNC Control System

DELEM DA-69T Control

  • 3D and 2D graphical touch screen programming mode
  • 3D visualisation in simulation and production
  • 17" high resolution colour TFT
  • 1280 x 1024 pixels, 32 bit colour
  • 3D graphics acceleration
  • Full touch screen control (IR-touch)
  • Sensor bending & correction interface
  • Profile-T3D offline software
Manual Upper Tool Clamping

Manual Upper Tool Clamping

The CNC Press Brake Machine use all Raw material is provided by qualified suppliers and chemical composition corresponds to international standards. Therefore, raw material yield and tensile strength are guaranteed, are standardized with a 8.4 x 3.5 mm safety groove, which keeps the tool from falling out.

Advantage:

  • Safe and fast tool change
  • Can be used without modifying Europe type punches
  • Front clamp - vertical tool change
  • Rear clamp - horizontal tool change
BGA-6 BackGauge

KRRASS® BGA-6 BackGauge

Press Brake 6-Axis CNC BackGauge with X1, X2, R1, R2, Z1, Z2-Axis

  • Ball screws and linear guide on X, R-axis.
  • Mechanical accuracy ± 0.03 mm.
  • Mechanical accuracy ± 0.03 mm.
  • Axes Z1‐Z2 speed 1000 mm/s.
  • Axis X1-X2 speed 500 mm/s.
  • Axis R1-R2 speed 500 mm/s.
  • Load capacity – 300 kg per support.
Rexroth Proportional Valve

Proportional Valve

The German Rexroth fully closed-loop electro-hydraulic servo high-frequency synchronous control system is adopted to ensure that the CNC press brake tool has high stability and high precision in the process of high-speed operation.

Advantage:

  • The frequency response (response frequency) is higher and can be as high as 200Hz.
  • It can continuously and proportionally control the pressure and flow of the hydraulic system, control the position, speed, and force, and reduce the impact of pressure changes.
  • Closed-loop control, signal feedback.
  • Original German imported products, longer service life.
Electric Crowning

KRRASS® family Electric Crowning

  • Very precise bending angles
  • Europe type dies with 60 mm and 90 mm
  • Base can be clamped as well as single dies with 13 mm tang
  • Electric crowning with a controller
  • Precise positioning and alignment of the crowning table
  • Easy and fast usage
DSP Laser Protection

Italy DSP Laser Protection (Optional)

DSP® laser protection will be necessary if you have a high requirement for the safety.

Advantage:

  • Laser protection, Multi beam Receiver
  • Pretective areas, Front, center and rear
  • The safety level is CAT.4 and SIL3
  • Detection Case protection degree: IP 65
  • Laser classification: class 1 M
  • Response time: 5 ms
  • Change Speed Point : 5mm + Stopping Space
  • The maximum protective distance is up to 15M
  • LED indicators show various states
Hybrid Servo ECO Function

Hybrid Servo ECO Function

KRRASS® New Hybrid Servo ECO Function

KRRASS® promotes a friendly environmental policy, and as such all our equipment features the Hybrid ECO Function. Our hybrid servo-drive positioning system provides accuracy at any position.

PBS CNC Press Brake Machine - power consumption advantage

Advantage:

  • Operating cost is min due to low energy consumption. Thus, it gives advantages to the user with high efficiency & low operation cost.
  • High dynamic for a higher productivity of the machine.
  • Compliance with EU Directives.
  • Lower energy for a green Machine.
  • Lowered sound pressure level at 50 dB.
  • The servo-motor, with closed loop speed control.
  • Energy efficiency of up to 35 % compared to conventional systems.
iMeasure Laser angle measurement system

Laser Check Angle Measurement System

The iMeasure Laser angle measurement system with Data-M Engineering for an accurate bend angle after only one bending operation.

The iMeasure are fully-automatic laser-assisted bend angle measurement systems for CNC press brakes. Irrespective of the properties or thickness of the material, the LaserCheck enables an exact determination of the bending angle with an accuracy of better than 0.1°. This represents precision which has never been available before.

  • Automatic angle correction
  • A laser beam is projected on the sheet metal surface
  • The camera detects the laser beam
  • The angle between the beam and the camera axis determines the bend angle
  • Force reduction + calculation of the springback
PBS CNC Press Brake Machine - front sheet follower supports system

Front Sheet Follower Supports System

The CNC press brakes with Sheet supports follower system for bending long and thin sheets,It basically consists of a pair of sheet supports placed on the front of the machine at the height of the bending line (bottom tool). Supports are controlled by the CNC, following and supporting the sheet during the bending process.

  • Brush and support shaft dim 350x900 up to 1200 mm
  • Automatic bending follower supports
  • AP1 - AP2 CNC-controlled interpolated axes
  • Ecommended for heavy parts or large thin plate
  • Bend as closed as 70°
  • Load capacity – 180 kg per support
Wila Hydraulic Clamping System

Wila Hydraulic Clamping System

The Wila’s ‘New Standard’ Tooling System has become market leader for precision, quality and flexibility for the press brakes machine for sale, the WILA’s state-of-the-art clamp system

Advantage:

  • Long service life: >10 years
  • Quick clamping for WILA style tooling
  • Simple push-button loading
  • Fast and safe tool changes: Reduce 80% time
  • High-precision bending angle and flange edge
Punches & Dies

Punches & Dies

Press Brake machine punches and dies will be one of the most important topics we discuss before you place the order. Any bending shape will be completed by a suitable set of punch and die. We can provide appropriate toolings according to different bending requirements of customers.

Bending Offline Software

Indispensable Tool To Increase Profitability

DELEM DA-Offline software maximises machine efficiency and production output of press brake machines. The Profile-T3D software facilitates offline programming and simulation the bending process.

Profile T3D Offline Programming

The Bending offline software is an indispensable tool to increase the profitability of any CNC press brake machine. The offline software Profile T3D enables in a quick, easy and efficient way, importing and unfolding 3D files, finding automatically solutions for tooling and bend sequences and simulating dynamically in 3D for checking collisions.

CNC Press Brake Technical Parameter

Name Bending Pressure Bending Length (A) Column Distance (B) Throat Depth (C) Slider Stroke Max. Opening Height (F) Y1,Y2-axis Down Speed Y1,Y2-axis Back Stroke Speed X-axis Max. Distance Main Motor
Unit kn mm mm mm mm mm mm / sec mm / sec mm kw
50T1600 500 1600 1250 205 160 540 230 140 600 5
80T/2500 800 2500 2000 350 170 570 230 140 600 8.7
110T/2500 110 2500 2000 410 200 570 220 140 600 8.7
110T/3200 1100 3200 2700 410 200 570 220 140 600 8.7
110T/4000 1100 4000 3500 410 200 570 220 140 600 8.7
135T/3200 1350 3200 2700 410 200 570 200 140 600 10.8
135T/4000 1350 4000 3500 410 200 570 200 140 600 10.8
175T/3200 1750 3200 2700 410 200 570 160 140 600 13.2
175T/4000 1750 4000 3500 410 200 570 160 140 600 13.2
175T/5000 1600 5000 4100 410 200 570 160 90 600 13.2
175T/6000 1600 6000 5100 410 200 570 160 90 600 13.2
210T/3200 2100 3200 2700 410 200 570 160 140 600 16.7
210T/4000 2100 4000 3500 410 200 570 160 140 600 16.7
210T/5000 2100 5000 4100 410 200 570 130 90 600 16.7
210T/6000 2100 6000 5100 410 200 570 130 90 600 16.7
250T/3200 2500 3200 2700 410 250 620 160 140 600 21.4
250T/4000 2500 4000 3500 410 250 620 160 140 600 21.4
250T/5000 2500 5000 4100 410 250 620 130 90 600 21.4
250T/6000 2500 6000 5100 410 250 620 130 90 600 21.4
320T/3200 3200 3200 2700 450 300 670 150 130 600 21.4
320T/4000 3200 4000 3500 450 300 670 150 130 600 21.4
320T/5000 3200 5000 4100 450 300 670 130 90 600 21.4
320T/6000 3200 6000 5100 450 300 670 130 90 600 21.4
400T/3200 4000 3200 2700 450 300 670 150 130 600 26.9
400T/4000 4000 4000 3500 450 300 670 150 130 600 26.9
400T/5000 4000 5000 4100 450 300 670 130 90 600 26.9
400T/6000 5000 6000 5100 450 300 670 130 90 600 26.9
500T/4000 5000 4000 3500 450 300 670 150 130 600 33
500T/5000 5000 5000 4100 450 300 670 130 90 600 33
500T/6000 5000 6000 5100 450 300 670 130 90 600 33

How useful was this post?

Click on a star to rate it!

Average rating 5 / 5. Vote count: 10

No votes so far! Be the first to rate this post.

5 /5
Based on 12 ratings

Reviewed by 12 users

  • Prefec press brake for my metalworking

    • by:
    • 12 months ago

    Satisfied with this press brake purchase. It has become an essential tool in our workshop and has significantly improved our productivity.

  • Çok iyi bükme makinesi

    • by: Anonymous
    • 1 year ago

    Çok iyi bükme makinesi, kaliteli ve iyi hizmet,
    Çok profesyonel .Gelecekte KRRASS ile işbirliği yapacağız ，Ayrıca KRRASS’ın Türkiye’ye hoş gelmesini diliyorum .Nice !!

1 2 3

Leave feedback about this

  • Rating
Choose Image

Please drop your contact to get in touch within 24 hours.

Please enable JavaScript in your browser to complete this form.
=