1. Fan cleaning is very important
Maintenance period: once a month
The fan has been used on the machine for a long time, resulting in the accumulation of a large number of solid dust in the fan and air duct, which makes the fan produce a lot of noise and is not conducive to dust removal and deodorization.
Maintenance method: loosen the throat clamp between the exhaust pipe and the fan, remove the exhaust pipe, and clean the dust in the exhaust pipe and the fan.
2. The water tank should be clean
Maintenance period: once every six months or before long-term use
Before the machine works, the water quality of the water cooler water tank must be checked. The quality and temperature of circulating water directly affect the service life of laser.
Maintenance method: replace the circulating water and clean the water tank regularly.
3. Clean the lens every day
Maintenance period: once in the morning and once in the evening, once a month
There are mirrors and lenses on the machine. The laser is reflected by these lenses, directly focused or focused, and then emitted from the laser hair. The lens is easy to produce dust and other pollutants, resulting in laser loss or lens damage.
Maintenance method: check the mirror every two months, and check the protective mirror or focusing mirror before going to work every day. If it does, remove it with a ball. If it can't be removed, gently wipe it in the same direction with cleaning product and absolute alcohol. If damaged, replace immediately.
4. Screw and coupling need to be fixed
Maintenance period: once a month
After working for a period of time, the screw and coupling of the active joint are easy to loosen, which affects the stability of mechanical movement. Therefore, it is necessary to observe whether there is abnormal noise or phenomenon in the operation of the machine, and contact the manufacturer for adjustment and maintenance in time.
Maintenance method: communicate with the manufacturer about equipment and maintenance regularly.
5. Clean the guide rail
Maintenance period: once a week
As one of the core components of the equipment, guide rail and frame are used to guide or support the equipment. In the process of equipment operation, a large number of problems will be produced in the process of workpiece processing. The dust and smoke deposited on the surface of guide rail and frame for a long time affect the processing accuracy of imaging equipment.
Maintenance method: firstly, wipe the original lubricating oil and dust on the guide rail with non-woven cloth, and then wipe the lubricating oil on the guide rail and frame for maintenance.
Learn more about our products, please visit and subscribe to our Youtube channel
