Tooling and Tool Storage Solutions
INNOVATIVE TOOLS TO ALLOW YOU TO BE MORE PRODUCTIVE
Tooling And Tool Storage Solutions
To answer these custom press brakes needs, Krrass provides innovative tool storage solutions dedicated to press brake standard & custom tooling : the Tool Station (modular tooling storage & changing system) and standard tooling cabinets.
Tool Storage System: Press Brake Storage, Loading & Unloading
The Press Brake Productivity Tool Station is available in two versions, both developed for the safe exchange and storage of WILA tooling. The ‘HD’ version is designed for easy exchange and storage of very large and heavy tools and is designed for use with the NSCL-HD-II-HC Heavy Duty Clamping. The regular version is ideal for smaller tools and is designed for use with the WILA Premium Clamping system.
The interface between the press brake and the Tool Station is ensured by 2 loading and unloading arms with roller & ball bearing system. It enables all sizes of punches & dies to be quickly, effortlessly & safely stored, loaded & unloaded. With our system, the working conditions of your operators will be improved and your productivity optimized.
The KRRASS Press Brake Productivity ToolStation
The Press Brake Productivity ToolStation is suitable in combination with NSCL/NSCR-II-HC and NSCL/NSCR-HD-II-HC and will be delivered with 1 module and one load/unload arm.
- Dimensions approximately 2500mm x 1500mm (floor plan incl. arm)
- Storage capacity 12 meters punches and 12 meters dies
- Equipped with 1 load/unload arm for top and bottom (left), length approximately 1150 mm
- Upper storage & load/unload arm equipped to support E2M ‘centric’
- Max. allowable load on load/unload arm 250 kg
- Height loading surface for the dies is adjustable between 940mm and 1065mm above the floor
- Daylight opening 490mm
- Loading and unloading possible at all storage positions
- Sheet metal covers on top and all 4 sides
- Tooling area accessible from 3 sides
- Color “Wila black”
- Usable for NS-tools with max width 300mm (centric against centerline)
- Guards to suit Wila made New Standard HC Tool Holders
If the execution of the sales product holds any options, these can be stated below the initial sales text as shown below (example)
Options:
- ToolStation load/unload arm on right side
- 2 rolling shutters (one to the front and one opposite of load/unload arm)
- Color according to customers request
- Support rail under load/unload arm
- Cabinet, containing 2 drawers (max. load 200kg each) built into the base
- Illumination, positioned in the upper section
- Additional ToolStation module, without load/unload arm